8Ω stereo power: 4 × 800W

4Ω stereo power: 4 × 1600W

Input connector: XLR female

Parallel connector: XLR male

Input impedance: 20 kΩ balanced

Maximum input level: 20 dBu / 7.74 V

Common-mode rejection ratio:>80 dB

Output connector: Speakon socket

USB Interface: Parameter control is achieved via PC software.

Network connection output socket: Connects to the network input terminal of the next power amplifier to enable multi-power amplifier networked operation.

Signal-to-noise ratio: 109 dB @ 18 dBu, 1 kHz, 26 dB gain level; damping factor:> 1000 @ 8 Ω

Total harmonic distortion + noise: <1%@1W at full power

Sampling frequency: 96 kHz / 24-bit

Frequency response: 20 Hz–34 kHz (+0/–0.3 dB, 1 W/8 Ω)

Touchscreen: Adjust parameters via the touchscreen

PC-based software: The software can control the media matrix, audio processor, DSP power amplifier, and active DSP module.

Cooling method: Stepless speed-adjustable fan; airflow direction: from front to rear

Power amplifier protection modes: audio limiter, high-temperature protection, DC protection, high-frequency protection, short-circuit protection, reverse electromotive force protection, peak current limiter, surge current limiter, power-on delay, power supply circuit breaker protection, and power supply overvoltage/undervoltage protection

Power supply specifications: AC voltage 180–240 V, frequency 50–60 Hz

Chassis dimensions (Height × Width × Length): 88 mm × 483 mm × 355 mm

Packaging dimensions (Height × Width × Length): 155 mm × 600 mm × 470 mm

Net weight: 10.5 kg

Net weight: 13 kg